The advantages of epoxy rods

A brief discussion on the advantages of epoxy rods of insulating materials

You must be familiar with the epoxy board. Xiaobian shared with you a lot about the characteristics and uses of epoxy panels. In fact, the epoxy rod and the epoxy board are basically the same, just like the same. It is also an important part of electrical insulation parts, and has great strength in the field of electrical components.

epoxy rod bar

The epoxy rod, as the name suggests, is not difficult to find its shape from its name. It is an electric non-alkali glass fiber cloth immersed in epoxy resin, baked, molded by hot pressing after processing into a circular or square cross-section of the bar. Suitable for mechanical, electrical and electronic parts with high insulation structure.

The epoxy plate is generally divided into two kinds: one is the epoxy glass fiber bar, which is commonly known as the drawing rod, which is generally used as the main technical index of the lightning arrester or the insulator core rod. It has high mechanical properties and dielectric properties. The heat resistance grade is B. It has high mechanical performance at medium temperature and stable electrical performance at high temperature.

Appearance of the epoxy bar: the surface should be smooth and smooth, without bubbles, grease and impurities, allowing uneven colors, scratches, and slight unfairness.
Specifications for epoxy rods:
Square bar: 10*24 10*22 10*30 20*30 20*20
Round rods: 18, 24, 26, 28, 30, 32, 32, 34, 36, 40, 45, 40, 45, 40, 45, 40, 45, 40, and 45, respectively.

Technical specifications of epoxy rods:

1, the bending strength is not less than 2000 kg / square centimeter.
2, the radial compressive strength is not less than 2000 kg / square centimeter.
3, wet withstand voltage 170 thousand V / M bonding strength of not less than 200 kg (metal parts and pipes)
4, the tensile strength is not less than 4000 kg / square centimeter.
5, the temperature resistance is not less than 120 degrees,
6, the shear strength is not less than 100 kg / square centimeter.
7, the density is greater than 1.80g/cm3
8, water absorption is less than 0.10%
9, dry state voltage 290 thousand volt / M
10, the axial compressive strength is not less than 1500 kg / square centimeter.
11, cold resistance is not less than -30 degree

The above is the detailed information of epoxy rods, if you want to process epoxy sticks, we can visit our factory, inspect, this factory has advanced equipment, many years of experience technicians, according to the requirements of customer research and development production, looking forward to negotiating with you.

leave a message

Ztelec Group